Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Correcting the skeletal class II using functional appliances, whether removable or fixed, always leads to skeletal and alveolar effects. However, some of these effects are unfavorable, the most significant being the loss of support in the lower dental arch. This loss of support leads to an uncontrolled labial inclination of the lower incisors and mesial movement of the lower; these dentoalveolar effects impact the degree of skeletal correction that can be achieved. Therefore, this study aimed to evaluate the skeletal and dentoalveolar effects following the use of a mini-implant-supported Twin-Block appliance compared to the conventional Twin-Block.
Many attempts have been made to modify the Twin-Block appliance to decrease the dentoalveolar effects, such as omitting the upper labial bow, including torquing spurs on the upper incisors, and adding acrylic capping on the lower incisors. However, these modifications have not been successful in eliminating the dentoalveolar effects. This is because the Twin-Block and other functional appliances are supported by teeth rather than bone. As a result, the components of the appliance exert force on the teeth while the mandible attempts to return to its natural resting position. No previous clinical trial described the use of the Twin-Block appliance supported by orthodontic mini-implants and the potential benefits of using mini-implants with Twin-Block in functional treatment.
Not provided
Not provided
Not provided
Not provided
Not provided
| Label | Type | Description | Intervention Names |
|---|---|---|---|
| Mini-implant-supported Twin-Block | Experimental | Treatment will be done using the Mini-implant-supported Twin-block appliance until the correction is achieved. |
|
| Conventional Twin-Block group | Active Comparator | Treatment will be done using the Twin-block appliance until the correction is achieved. |
|
| Name | Type | Description | Arm Group Labels | Other Names |
|---|---|---|---|---|
| Mini-implant-supported Twin-Block | Device | Mini-implants will support the Twin-Block appliance during the functional treatment. |
|
| Measure | Description | Time Frame |
|---|---|---|
| Change in the overjet | Lateral cephalometric images were taken for each patient. This was measured sagittally from the upper central incisor edge to the labial surface of the lower central incisor (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the overbite | Lateral cephalometric images were taken for each patient. This was measured vertically from the upper to the lower central incisors' edges (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the molar relationship | Lateral cephalometric images were taken for each patient. This was measured sagittally from the mesial cusp of the maxillary first permanent molar to the mesial cusp of the mandibular first permanent molar (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the position of the maxillary base | Lateral cephalometric images were taken for each patient. This was measured sagittally from A point to a vertical reference plane (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the position of the mandibular base | Lateral cephalometric images were taken for each patient. This was measured sagittally from Pogonion Point to a vertical reference plane (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
Not provided
Not provided
Inclusion Criteria:
Exclusion Criteria:
Not provided
Not provided
Not provided
Not provided
Not provided
| Name | Affiliation | Role |
|---|---|---|
| Rabea A Ghareeb, DDS | Department of Orthodontics, Faculty of Dentistry, Damascus University, Damascus, Syria | Principal Investigator |
| Kinda Sultan, DDS MSc PhD | Department of Orthodontics, Faculty of Dentistry, Damascus University | Study Director |
| Mohammad Y Hajeer, DDS MSc PhD | Department of Orthodontics, Faculty of Dentistry, Damascus University | Study Chair |
| Facility | Status | City | State | ZIP | Country | Contacts |
|---|---|---|---|---|---|---|
| Department of Orthodontics, Faculty of Dentistry, University of Damsacus | Damascus | DM20 HAJ72 | Syria |
| PubMed Identifier | Type | Citation | Retractions |
|---|---|---|---|
| 35345811 | Background | Abdulhadi A, Burhan AS, Hajeer MY, Hamadah O, Mahmoud G, Nawaya FR, Namera MO. Evaluation of the Functional Treatment of Patients With Skeletal Class II Malocclusion Using Low-Level Laser Therapy-Assisted Twin-Block Appliance: A Three-Arm Randomized Controlled Trial. Cureus. 2022 Mar 24;14(3):e23449. doi: 10.7759/cureus.23449. eCollection 2022 Mar. | |
| 25296729 |
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
| ID | Term |
|---|---|
| D008312 | Malocclusion, Angle Class II |
| ID | Term |
|---|---|
| D008310 | Malocclusion |
| D014076 | Tooth Diseases |
| D009057 | Stomatognathic Diseases |
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
| Twin-Block | Device | This is the main appliance that will be used to correct the Class II deformity. |
|
| Change in the mandibular position relative to the upper jaw | Lateral cephalometric images were taken for each patient. This was measured sagittally from A point to Pogonion Point (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in condylar head position | Lateral cephalometric images were taken for each patient. This was measured sagittally from Condylion point to the vertical reference plane (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the composite mandibular length | Lateral cephalometric images were taken for each patient. This was measured sagittally from Condylion Point to the Pogonion Point (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in position of the maxillary incisor | Lateral cephalometric images were taken for each patient. This was measured sagittally from the upper central incisor edge to the A Point (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in position of the mandibular incisor | Lateral cephalometric images were taken for each patient. This was measured sagittally from the lower central incisor edge to the Pogonion Point (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in position of the maxillary permanent first molar | Lateral cephalometric images were taken for each patient. This was measured sagittally from the mesial cusp of the maxillary first permanent molar to A Point (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in position of the mandibular permanent first molar | Lateral cephalometric images were taken for each patient. This was measured sagittally from the mesial cusp of the mandibular first permanent molar to the Pogonion Point (in mm). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the ramus height | Lateral cephalometric images were taken for each patient. The distance was measured vertically from the Articular Point (Ar) to the Gonion Point (Go) in millimeters. | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the corpus length | Lateral cephalometric images were taken for each patient. This was measured sagittally from the Gonion (Go) Point to the Mention (Me) Point. The distance is measured in mm. | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in MM angle | Lateral cephalometric images were taken for each patient. This angle, measured in degrees, represented the amount of vertical divergence between the upper and lower jaws in the cephalometric analysis. It is calculated for the internal angle formed by the intersection between the maxillary and mandibular planes. | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the SN-OP | Lateral cephalometric images were taken for each patient. This angle, measured in degrees, represented the relationship between the occlusal plane (OP) and the anterior cranial base (the distance between Sella (S) and Nasion (N)) in the vertical direction. | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the SN-MP | Lateral cephalometric images were taken for each patient This angle, measured in degrees, represented the relationship between the lower jaw plane and the cranial base in the vertical direction. | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the Bjork sum (N-S-Ar + S-Ar-Go +Ar-Go-Me) | Lateral cephalometric images were taken for each patient. This angle, measured in degrees, was the sum of three angles: the saddle angle (N-S-Ar angle), the articular angle (S-Ar-Go), and the gonial angle (Ar-Go-Me). | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the inclination of the upper incisors. | Lateral cephalometric images were taken for each patient. This angle, measured in degrees, represented the relationship between the upper incisor axis and the anterior cranial base in the anteroposterior direction. It was measured between the upper incisor axis and the SN plane. | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Change in the L1-MP angle | Lateral cephalometric images were taken for each patient. This angle, measured in degrees, represented the relationship between the lower incisor axis and the mandibular base in the anteroposterior direction. It was measured between the lower incisor axis and the Go-Me plane. | T0: One day before the beginning of the functional treatment, T1: After completing functional treatment which which is expected within 11 months. |
| Burhan AS, Nawaya FR. Dentoskeletal effects of the Bite-Jumping Appliance and the Twin-Block Appliance in the treatment of skeletal Class II malocclusion: a randomized controlled trial. Eur J Orthod. 2015 Jun;37(3):330-7. doi: 10.1093/ejo/cju052. Epub 2014 Oct 8. |
| 30837435 | Background | Tripathi T, Singh N, Rai P, Gupta P. Mini-implant-supported twin-block appliance: An innovative modification. Niger J Clin Pract. 2019 Mar;22(3):432-438. doi: 10.4103/njcp.njcp_342_18. |
| 12970656 | Background | O'Brien K, Wright J, Conboy F, Sanjie Y, Mandall N, Chadwick S, Connolly I, Cook P, Birnie D, Hammond M, Harradine N, Lewis D, McDade C, Mitchell L, Murray A, O'Neill J, Read M, Robinson S, Roberts-Harry D, Sandler J, Shaw I. Effectiveness of early orthodontic treatment with the Twin-block appliance: a multicenter, randomized, controlled trial. Part 1: Dental and skeletal effects. Am J Orthod Dentofacial Orthop. 2003 Sep;124(3):234-43; quiz 339. doi: 10.1016/S0889540603003524. |
| 25052373 | Background | Ehsani S, Nebbe B, Normando D, Lagravere MO, Flores-Mir C. Short-term treatment effects produced by the Twin-block appliance: a systematic review and meta-analysis. Eur J Orthod. 2015 Apr;37(2):170-6. doi: 10.1093/ejo/cju030. Epub 2014 Jul 22. |
| 41347939 | Derived | Ghareeb RA, Sultan K, Hajeer MY, Ajaj MA, Alzoubi H. Comparison of skeletal and dentoalveolar effects of mini-implant-supported twin block versus conventional twin block in treating growing patients with Class II Division 1 malocclusion: a two-arm randomized controlled clinical trial. Eur J Orthod. 2025 Oct 16;47(6):cjaf093. doi: 10.1093/ejo/cjaf093. |