Participant received 32 g/m3 of gas ozone for 30 second.

Participant received an application of desensitized gel, fluoride and potassium nitrate gel , and a first step of an irradiation with diode laser for 20 second of interval, 808 wavelength, and power incrementation, from 0,2 till 0,6 W, not in contact. Then the second step of irradiation for 30 second in contact with dentine surface, 808 wavelength, and power incrementation, from 0,2 till 0,6 W. Then the surface was rinsed, and the irradiation applied for a third time again without the gel as the second step.

The application of ozone was performed with the HealOzone System X4 (HealOzon, Kavo, Germany). The dentist adapted the silicon cup stricken on the cervical surface of the teeth. The pumping system created the vacuum and the machine applied high dosage of ozone, equal to 32 g/m3, for 30 second.

Two stimuli were adopted to assess the degree of dentine hypersensitivities: evaporative test and tactile test. For the evaporative test, the teeth were trigged by a single operator, experienced, and trained, with a jet of air at a pressure of 45-60 psi at a distance of 2 mm from the buccal surface for 35 s. For the tactile test, the pain was triggered using a probe gently touched the dentine exposed in mesiodistal direction. The patient quantified the pain with the visual analogue scale (VAS) giving a value in the range from 1 (minimum pain) to 10 (maximum pain). The highest value of the pain stimulated by the two methods was registered.

Two stimuli were adopted to assess the degree of dentine hypersensitivities: evaporative test and tactile test. For the evaporative test, the teeth were trigged by a single operator, experienced, and trained, with a jet of air at a pressure of 45-60 psi at a distance of 2 mm from the buccal surface for 35 s. For the tactile test, the pain was triggered using a probe gently touched the dentine exposed in mesiodistal direction. The patient quantified the pain with the visual analogue scale (VAS) giving a value in the range from 1 (minimum pain) to 10 (maximum pain). The highest value of the pain stimulated by the two methods was registered.

Two stimuli were adopted to assess the degree of dentine hypersensitivities: evaporative test and tactile test. For the evaporative test, the teeth were trigged by a single operator, experienced, and trained, with a jet of air at a pressure of 45-60 psi at a distance of 2 mm from the buccal surface for 35 s. For the tactile test, the pain was triggered using a probe gently touched the dentine exposed in mesiodistal direction. The patient quantified the pain with the visual analogue scale (VAS) giving a value in the range from 1 (minimum pain) to 10 (maximum pain). The highest value of the pain stimulated by the two methods was registered.