Administrativley Complete, <75% Participants

This trial studies how a customized 3D-printed oral stent compares to a standard stent made by a dentist for use in imaging scans in patients with head and neck cancer receiving radiation therapy. Oral stents are designed to help prevent radiation-related side effects while receiving radiation therapy. Traditional oral stents are created by dentists, require at least 2 separate appointments, and may not be as cost-effective. A customized, 3D-printed oral stent may perform as well as a standard stent made by a dentist and have a significantly shorter turnaround to device delivery.

PRIMARY OBJECTIVES:

I. To evaluate whether a customized 3 dimensional (3D) printed oral stent achieves non-inferior levels of patient reported outcomes as the standard dental-fabricated oral stents at the time prior to starting treatment.

SECONDARY OBJECTIVES:

I. To evaluate the performance of the 3D stent on imaging parameters (i.e. mandibular and soft tissue displacement) for degree of normal tissue sparing.

II. Evaluate the levels of patient reported outcomes after patients have developed side effects from radiation treatment.

III. To evaluate the commercially available TruGuard oral cavity positioning system.

OUTLINE:

Patients wear a customized 3D printed oral stent over 5-10 minutes in the supine position at the time of radiation simulation, before starting radiation therapy, and in the 3rd to 5th week of radiation therapy. Patients may also optionally wear the commercially-made stent called TruGuard at these timepoints.

Inclusion Criteria:

• Patient is dispositioned to receive definitive or adjuvant radiotherapy for treatment of a diagnosed head and neck malignancy.
• Treating radiation oncologist has determined the necessity of an oral stent and a device has been fabricated by dentistry at MD Anderson Cancer Center (MDACC).
• Patient has received pre-treatment imaging which includes the mandibular and maxillary dentition.
• Eastern Cooperative Oncology Group performance status (ECOG PS) 0-2.
• Signed study-specific consent form.

Exclusion Criteria:

• No pre-treatment computed tomography (CT) imaging including the maxilla and mandible is available.
• Prior head and neck radiotherapy.
• Severe trismus with an incisal opening of < 10 mm.
• Inability to comply with the study procedures.
• Patients who have received dental stents fabricated outside of MDACC.