Not provided
Not provided
Not provided
Not provided
Not provided
Terminated for business reasons not due to scientific data. Sufficient data was acquired to transition program development to other technologies
Not provided
| Name | Class |
|---|---|
| Baxter Healthcare Corporation | INDUSTRY |
Not provided
Not provided
Not provided
Peritoneal dialysis (PD) is a well-established treatment for renal failure including long-term management of end stage renal disease (ESRD) by continuous ambulatory peritoneal dialysis or automated peritoneal dialysis (APD).
Complementary therapies offer longer term survival for patients with ESRD. However, none of them are devoid of side effects and today their limitations are better understood by the nephrologist.
The AMIA APD Solution Generation System combines an updated AMIA APD Cycler with Sharesource Platform (previously cleared) with an in-home water system technology and leverages newly developed AMIA APD Concentrates.
The AMIA APD Concentrates, after dilution by the AMIA APD Solution Generation System, are indicated for adult patients in acute or chronic renal failure when non-dialytic medical therapy is judged to be inadequate.
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
| Label | Type | Description | Intervention Names |
|---|---|---|---|
| AMIA APD Solution Generation System | Experimental | A simulated treatment will take place before the patient receives study treatment, during week 1 and after 4, 8 and 12 weeks of study treatment period. The dialysis solution generated by the simulated treatment will be collected from the system in the heater bag and used to evaluate the chemical composition of the final dialysis solution produced by patients using the AMIA APD Solution Generation System. Also, product water from the Water Device (pre-sterilizing filters) will be collected and tested at each visit. |
|
| Name | Type | Description | Arm Group Labels | Other Names |
|---|---|---|---|---|
| AMIA APD Solution Generation System | Device | The AMIA APD Solution Generation System consists of the AMIA APD Cycler, Sharesource Platform, AMIA APD Concentrates, a disposable set, a bag tray, a Water Softener, and a Water Device (WD). |
| Measure | Description | Time Frame |
|---|---|---|
| Percentage of Tests Meeting Specifications for the Chemical Composition of Final Dialysis Solution by Visit | The dialysis solution generated by the simulated treatment will be sampled from the heater bag, compared to the specifications of Baxter's approved low calcium Dianeal PD solution. The following 9 test methods will be analyzed: pH at 25 C, Color, 5- (hydroxymethyl)furfural (5HMF), Dextrose hydrous Assay (1.5%, 2.5% or 4.25%), Sodium Lactate Assay, Sodium Assay, Chloride Assay, Magnesium Chloride Hexahydrate (MgCl2.6H2O) Assay, and Calcium Chloride Dihydrate (CaCl2.2H2O) Assay. Measurements were collected using instruments such as meters, chromatography, etc. Data will be reported showing percentage of participants meeting specifications versus percentage of participants not meeting specification. If any one of the values falls outside the limits, then the particular test is considered NOT meeting specifications. | Week 1, 4, 8 and 12 |
| Percentage of Tests Meeting Specifications for the Microbiological and Chemical Testing of Product Water From Water Device (Pre-sterilizing Filters) by Visit | Microbiological testing within <=0 CFU/mL limit for total aerobic microbial count (TAMC) and total yeast/mold count (TYMC) and <0.03 EU/mL limit for Endotoxins, and chemical parameters. Product water from the WD (pre-sterilizing filters) was collected and tested for microbiological (including endotoxin) contamination per USP <61> and USP <85> and chemical contaminants according to ISO 13959. Chemical parameters include aluminum, copper, fluoride, lead, nitrate, sulphate, zinc, calcium, magnesium, potassium, sodium, antimony, arsenic, barium, beryllium, cadmium, chromium, mercury, selenium, silver, thallium, nickel, cobalt, total chlorine. Chemical measurements were collected using instruments such as meters, chromatography, etc. Data will be reported showing percentage of participants meeting specifications versus percentage of participants not meeting specification. If any one of the values falls outside the limits, then the particular test is considered NOT meeting specifications. | Week 1, 4, 8 and 12 |
| Percentage of Tests Meeting Specifications for the Microbiological Testing of Product Water From Holding Bag (Post-sterilizing Filters) by Visit |
| Measure | Description | Time Frame |
|---|---|---|
| Change From Baseline in Total Kt/Vurea at Week 5, 6, 7, or 8 | Peritoneal dialysis adequacy will be measured by sample collection and calculation of Total Kt/Vurea. Weekly peritoneal Kt/Vurea was calculated from blood and 24-hour PD effluent samples and renal Kt/Vurea was calculated from 24-hour collection of urine samples (if applicable) and blood samples after the patient had been dialyzing with the AMIA APD Solution Generation System for at least 4 weeks. Total Kt/Vurea is the sum of peritoneal Kt/Vurea and renal Kt/Vurea. Note: This secondary efficacy endpoint was measured by sample collection and calculation of total Kt/Vurea, occurring one time during Week 5, 6, 7, or 8 of the Study Treatment Period. |
Not provided
Inclusion Criteria:
Patient is 18 years or older.
Patient with ESRD receiving PD therapy, and who is already trained and regularly using the AMIA or HomeChoice APD Cycler with Dianeal PD Solution for at least 12 weeks.
Patient is receiving or willing and able to use Dianeal Low Calcium (2.5 mEq/L) PD prescriptive regimen at study treatment initiation per Investigator's assessment.
Patient demonstrates adequate PD therapy with clinical euvolemia as assessed by the Investigator with a total Kt/Vurea of a minimum of 1.7 within 45 days of Screening, or measured at Screening. If a total Kt/Vurea is not available within 45 days of Screening, it will be measured at Screening.
Investigator assesses that, with appropriate training, the patient will be able to successfully manage his/her dialysis treatments with the AMIA APD Solution Generation System.
Patient is available and is willing to complete training on the AMIA APD Solution Generation System.
Patient and home environment are deemed suitable for treatment with the AMIA APD Solution Generation System, while in the home.
Home electrical and water assessments meet suitability criteria for the AMIA APD Solution Generation System.
The patient's home has suitable wireless connection or patient is willing to allow installation of suitable wireless connection.
Patient and/or care partner (if participating) is able to read and understand English, and provide informed consent after an explanation of the proposed study. If the patient does not read and understand English, patient may still participate if he/she has a co-residing care partner who reads and understands English, assessed as adequate by the PI.
Women of childbearing potential (not menopausal or surgically sterile) must not be pregnant. Serum qualitative and quantitative pregnancy test will be done within 14 days prior to initiation of study product.
Sexually active males and females agree to use a reliable means of contraception during the study and for 30 days afterwards (e.g., oral contraceptive and condom, intrauterine device and condom, or diaphragm with spermicide and condom).
Exclusion Criteria:
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
| Facility | Status | City | State | ZIP | Country | Contacts |
|---|---|---|---|---|---|---|
| Investigational Site | Jonesboro | Arkansas | 72401 | United States | ||
| Investigational Site |
Not provided
Not provided
Not provided
| ID | Title | Description |
|---|---|---|
| FG000 | AMIA APD Solution Generation System | A simulated treatment will take place before the patient receives study treatment, during week 1 and after 4, 8 and 12 weeks of study treatment period. The dialysis solution generated by the simulated treatment will be collected from the system in the heater bag and used to evaluate the chemical composition of the final dialysis solution produced by patients using the AMIA APD Solution Generation System. Also, product water from the Water Device (pre-sterilizing filters) will be collected and tested at each visit. AMIA APD Solution Generation System: The AMIA APD Solution Generation System consists of the AMIA APD Cycler, Sharesource Platform, AMIA APD Concentrates, a disposable set, a bag tray, a Water Softener, and a Water Device (WD). |
| Title | Milestones | Reasons Not Completed | |||||
|---|---|---|---|---|---|---|---|
| Overall Study |
|
Not provided
| Type | Includes Protocol | Includes SAP | Includes ICF | Document Label | Document Date | Document Uploaded Date | Document File Name |
|---|---|---|---|---|---|---|---|
| Prot | Yes | No | No | Study Protocol | Nov 1, 2019 | Dec 15, 2020 |
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Not provided
Microbiological testing within <=0 CFU/mL limit for TAMC and TYMC and <0.03 EU/mL limit for Endotoxins. Data will be reported showing percentage of participants meeting specifications versus percentage of participants not meeting specification. If any one of the values falls outside the limits, then the particular test is considered NOT meeting specifications. A test was considered as meeting specifications if all of the following parameters fell within the specified limits: tryptic soy broth growth, fluid thioglycolate growth, and endotoxins. Water in the holding bag was collected and tested for microbiological contamination and endotoxin levels per USP <71> and USP <85>.
| Week 1, 4, 8 and 12 |
| Baseline, Week 5 or Week 6 or Week 7 or Week 8 |
| San Jose |
| California |
| 95125 |
| United States |
| Investigational Site | Jacksonville | Florida | 32224 | United States |
| Investigational Site | Chicago | Illinois | 60612 | United States |
| Investigational Site | Ann Arbor | Michigan | 48104 | United States |
| Investigational Site | Jackson | Mississippi | 39213 | United States |
| Investigational Site | New York | New York | 10021 | United States |
| Investigational Site | New York | New York | 10029 | United States |
| Investigational Site | Cleveland | Ohio | 44106 | United States |
| Investigational Site | Temple | Texas | 76508 | United States |
| Investigational Site | Fitchburg | Wisconsin | 53713 | United States |
| COMPLETED |
|
| NOT COMPLETED |
|
|
The Safety Set was based on the Intent-to-Treat principle and included all patients who received at least one treatment with the AMIA APD Solution Generation System and who had at least one measurement for the primary endpoint (either primary efficacy or primary safety).
Not provided
| ID | Title | Description |
|---|---|---|
| BG000 | AMIA APD Solution Generation System | A simulated treatment will take place before the patient receives study treatment, during week 1 and after 4, 8 and 12 weeks of study treatment period. The dialysis solution generated by the simulated treatment will be collected from the system in the heater bag and used to evaluate the chemical composition of the final dialysis solution produced by patients using the AMIA APD Solution Generation System. Also, product water from the Water Device (pre-sterilizing filters) will be collected and tested at each visit. AMIA APD Solution Generation System: The AMIA APD Solution Generation System consists of the AMIA APD Cycler, Sharesource Platform, AMIA APD Concentrates, a disposable set, a bag tray, a Water Softener, and a Water Device (WD). |
| Units | Counts |
|---|---|
| Participants |
|
| Title | Description | Population Description | Parameter Type | Dispersion Type | Unit of Measure | Calculate Percentage | Denominator Units Selected | Denominators | Classes | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Age, Continuous | Mean | Standard Deviation | years |
| ||||||||||||||||||||||
| Sex: Female, Male | Count of Participants | Participants |
| |||||||||||||||||||||||
| Race/Ethnicity, Customized | Count of Participants | Participants |
|
| Type | Title | Description | Population Description | Reporting Status | Anticipated Posting Date | Parameter Type | Dispersion Type | Unit of Measure | Calculate Percentage | Time Frame | Units Analyzed | Denominator Units Selected | Arm/Group Information | Denominators | Classes | Analyses | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Primary | Percentage of Tests Meeting Specifications for the Chemical Composition of Final Dialysis Solution by Visit | The dialysis solution generated by the simulated treatment will be sampled from the heater bag, compared to the specifications of Baxter's approved low calcium Dianeal PD solution. The following 9 test methods will be analyzed: pH at 25 C, Color, 5- (hydroxymethyl)furfural (5HMF), Dextrose hydrous Assay (1.5%, 2.5% or 4.25%), Sodium Lactate Assay, Sodium Assay, Chloride Assay, Magnesium Chloride Hexahydrate (MgCl2.6H2O) Assay, and Calcium Chloride Dihydrate (CaCl2.2H2O) Assay. Measurements were collected using instruments such as meters, chromatography, etc. Data will be reported showing percentage of participants meeting specifications versus percentage of participants not meeting specification. If any one of the values falls outside the limits, then the particular test is considered NOT meeting specifications. | Safety Set used for analysis population. Also, Overall Number of Tests Analyzed (N) was captured, along with number of evaluable tests (n) for each individual timepoint. | Posted | Number | Percentage of Tests | Week 1, 4, 8 and 12 | Tests | Tests |
|
|
| ||||||||||||||||||||||||||
| Primary | Percentage of Tests Meeting Specifications for the Microbiological and Chemical Testing of Product Water From Water Device (Pre-sterilizing Filters) by Visit | Microbiological testing within <=0 CFU/mL limit for total aerobic microbial count (TAMC) and total yeast/mold count (TYMC) and <0.03 EU/mL limit for Endotoxins, and chemical parameters. Product water from the WD (pre-sterilizing filters) was collected and tested for microbiological (including endotoxin) contamination per USP <61> and USP <85> and chemical contaminants according to ISO 13959. Chemical parameters include aluminum, copper, fluoride, lead, nitrate, sulphate, zinc, calcium, magnesium, potassium, sodium, antimony, arsenic, barium, beryllium, cadmium, chromium, mercury, selenium, silver, thallium, nickel, cobalt, total chlorine. Chemical measurements were collected using instruments such as meters, chromatography, etc. Data will be reported showing percentage of participants meeting specifications versus percentage of participants not meeting specification. If any one of the values falls outside the limits, then the particular test is considered NOT meeting specifications. | Safety Set used for analysis population. Also, Overall Number of Tests Analyzed (N) was captured, along with number of evaluable tests (n) for each individual timepoint. | Posted | Number | Percentage of Tests | Week 1, 4, 8 and 12 | Tests | Tests |
| ||||||||||||||||||||||||||||
| Primary | Percentage of Tests Meeting Specifications for the Microbiological Testing of Product Water From Holding Bag (Post-sterilizing Filters) by Visit | Microbiological testing within <=0 CFU/mL limit for TAMC and TYMC and <0.03 EU/mL limit for Endotoxins. Data will be reported showing percentage of participants meeting specifications versus percentage of participants not meeting specification. If any one of the values falls outside the limits, then the particular test is considered NOT meeting specifications. A test was considered as meeting specifications if all of the following parameters fell within the specified limits: tryptic soy broth growth, fluid thioglycolate growth, and endotoxins. Water in the holding bag was collected and tested for microbiological contamination and endotoxin levels per USP <71> and USP <85>. | Safety Set used for analysis population. Also, Overall Number of Tests Analyzed (N) was captured, along with number of evaluable tests (n) for each individual timepoint. | Posted | Number | Percentage of Tests | Week 1, 4, 8 and 12 | Tests | Tests |
| ||||||||||||||||||||||||||||
| Secondary | Change From Baseline in Total Kt/Vurea at Week 5, 6, 7, or 8 | Peritoneal dialysis adequacy will be measured by sample collection and calculation of Total Kt/Vurea. Weekly peritoneal Kt/Vurea was calculated from blood and 24-hour PD effluent samples and renal Kt/Vurea was calculated from 24-hour collection of urine samples (if applicable) and blood samples after the patient had been dialyzing with the AMIA APD Solution Generation System for at least 4 weeks. Total Kt/Vurea is the sum of peritoneal Kt/Vurea and renal Kt/Vurea. Note: This secondary efficacy endpoint was measured by sample collection and calculation of total Kt/Vurea, occurring one time during Week 5, 6, 7, or 8 of the Study Treatment Period. | Safety Set | Posted | Mean | Standard Deviation | Kt/Vurea | Baseline, Week 5 or Week 6 or Week 7 or Week 8 |
|
AEs and SAEs will be collected after the informed consent is signed and will continue to be collected throughout the Study Treatment Period and during the follow-up period of 5 days after the last study treatment.
Not provided
Not provided
| ID | Title | Description | Deaths (Affected) | Deaths (At Risk) | Serious Events (Affected) | Serious Events (At Risk) | Other Events (Affected) | Other Events (At Risk) |
|---|---|---|---|---|---|---|---|---|
| EG000 | AMIA APD Solution Generation System | A simulated treatment will take place before the patient receives study treatment, during week 1 and after 4, 8 and 12 weeks of study treatment period. The dialysis solution generated by the simulated treatment will be collected from the system in the heater bag and used to evaluate the chemical composition of the final dialysis solution produced by patients using the AMIA APD Solution Generation System. Also, product water from the Water Device (pre-sterilizing filters) will be collected and tested at each visit. AMIA APD Solution Generation System: The AMIA APD Solution Generation System consists of the AMIA APD Cycler, Sharesource Platform, AMIA APD Concentrates, a disposable set, a bag tray, a Water Softener, and a Water Device (WD). | 0 | 22 | 3 | 22 | 2 | 22 |
| Term | Organ System | Source Vocabulary | Assessment Type | Notes | Statistical Information |
|---|---|---|---|---|---|
| Atrial fibrillation | Cardiac disorders | MedDRA 20.0 | Systematic Assessment |
| |
| Peritonitis | Infections and infestations | MedDRA 21.1 | Systematic Assessment |
| |
| Peritonitis bacterial | Infections and infestations | MedDRA 21.1 | Systematic Assessment |
|
| Term | Organ System | Source Vocabulary | Assessment Type | Notes | Statistical Information |
|---|---|---|---|---|---|
| Hypotension | Vascular disorders | MedDRA 20.0 | Systematic Assessment |
|
The study was terminated for business reasons not due to scientific data. Sufficient data was acquired to transition program development to other technologies. All enrolled subjects had completed treatment at the time that the US was impacted by COVID-19.
The Sponsor reserves the right of prior review and approval of data from this study relative to the potential release of proprietary information to any publication or for any presentation.
| Title | Organization | Phone | Extension | |
|---|---|---|---|---|
| Global CORP Clinical Trials Disclosure | Vantive | +1 2249484283 | Global.CORP.ClinicalTrialsDisclosure@vantive.com |
| Prot_000.pdf |
| SAP | No | Yes | No | Statistical Analysis Plan | Mar 4, 2020 | Dec 15, 2020 | SAP_001.pdf |
Not provided
| ID | Term |
|---|---|
| D007676 | Kidney Failure, Chronic |
| ID | Term |
|---|---|
| D051436 | Renal Insufficiency, Chronic |
| D051437 | Renal Insufficiency |
| D007674 | Kidney Diseases |
| D014570 | Urologic Diseases |
| D052776 | Female Urogenital Diseases |
| D005261 | Female Urogenital Diseases and Pregnancy Complications |
| D000091642 | Urogenital Diseases |
| D052801 | Male Urogenital Diseases |
| D002908 | Chronic Disease |
| D020969 | Disease Attributes |
| D010335 | Pathologic Processes |
| D013568 | Pathological Conditions, Signs and Symptoms |
Not provided
Not provided
| White |
|
| Other |
|
| Week 1 (1.5% Dextrose): Did Not Meet Specifications |
|
|
| Week 1 (1.5% Dextrose): Missing Results |
|
|
| Week 4 (2.5% Dextrose): Met Specifications |
|
|
| Week 4 (2.5% Dextrose): Did Not Meet Specifications |
|
|
| Week 4 (2.5% Dextrose): Missing Results |
|
|
| Week 8 (4.25% Dextrose): Met Specifications |
|
|
| Week 8 (4.25% Dextrose): Did Not Meet Specifications |
|
|
| Week 8 (4.25% Dextrose):Missing Results |
|
|
| Week 12 (1.5% Dextrose): Met Specifications |
|
|
| Week 12 (1.5% Dextrose): Did Not Meet Specifications |
|
|
| Week 12 (1.5% Dextrose): Missing Results |
|
|
|
|
|
|
| Units | Counts |
|---|---|
| Participants |
|
|