In this study, Idealplast C® (6cm*2.5m) was used.

In the NST group, Pretape Cramer® (100% cotton, 1.25cm*10m) was used.

Elastic bandage

One anchor strip is applied around the ankle with no tension applied to the tape to avoid restricting blood flow. A supporting stirrup strap is applied from the inside of the ankle, under the heel with no tension up to this point. As the tape is passed up the outside of the ankle tension is applied to the tape with the foot in slight dorsiflexion and secured to the anchor strap (black arrow).

For heel lock, a second strip is applied on the outside of the ankle, taken across the front of the ankle and just above the bony part on the inside of the ankle and back towards the heel (red arrow). Then taken around and under the heel back the way you have just come and around the front of the ankle (orange arrow). The tape then passes above the bony part of the ankle on the outside and diagonally towards the heel, across to the inside of the ankle then around the top to finish

The CDP device employed in this study was Smart Equitest® version 8.2 (NeuroCom International Inc., Clackamas, OR, USA). Posturography analysis was conducted using the SOT. This test assesses postural control through the use of external stimuli on the visual and proprioceptive system.

Participants were instructed to stand on the force-plate facing the visual surround. A safety harness was fixed to prevent injury from falls. Their bare feet position on force-plates was adjusted according to the height of the patient, as marked on the equipment. Subjects had to maintain their COG stable in 3 consecutive series of 20s duration for each of the 6 conditions in the test.