Pain detection thresholds will be measured with an electronic pressure algometer (Algometer, Somedic, Denmark) applied at the center of the pulp of the 2nd toe. The probe has a surface area of 1 cm2. The pressure is increased from 0 at a rate of 30kPa/s to a maximum pressure of 1000kPa. Pain detection threshold is defined as the point at which the pressure sensation turns to pain. The subjects are instructed to press a button when these points are reached. The algometer displays the pressure intensity at which the button is pressed. If the subjects do not press the button at a pressure of 1000 kPa, this value is considered as threshold.

Pain detection thresholds will be measured with an electronic pressure algometer (Algometer, Somedic, Denmark) applied at the center of the pulp of the 2nd toe. The probe has a surface area of 1 cm2. The pressure is increased from 0 at a rate of 30kPa/s to a maximum pressure of 1000kPa. Pain detection threshold is defined as the point at which the pressure sensation turns to pain. The subjects are instructed to press a button when these points are reached. The algometer displays the pressure intensity at which the button is pressed. If the subjects do not press the button at a pressure of 1000 kPa, this value is considered as threshold.

Pain detection thresholds will be measured with an electronic pressure algometer (Algometer, Somedic, Denmark) applied at the center of the pulp of the 2nd toe. The probe has a surface area of 1 cm2. The pressure is increased from 0 at a rate of 30kPa/s to a maximum pressure of 1000kPa. Pain detection threshold is defined as the point at which the pressure sensation turns to pain. The subjects are instructed to press a button when these points are reached. The algometer displays the pressure intensity at which the button is pressed. If the subjects do not press the button at a pressure of 1000 kPa, this value is considered as threshold.

Pain detection thresholds will be measured with an electronic pressure algometer (Algometer, Somedic, Denmark) applied at the center of the pulp of the 2nd toe. The probe has a surface area of 1 cm2. The pressure is increased from 0 at a rate of 30kPa/s to a maximum pressure of 1000kPa. Pain detection threshold is defined as the point at which the pressure sensation turns to pain. The subjects are instructed to press a button when these points are reached. The algometer displays the pressure intensity at which the button is pressed. If the subjects do not press the button at a pressure of 1000 kPa, this value is considered as threshold.

Beck Depression Inventory (BDI-II): a 21 question multiple choice inventory used to measure severity of depression. This will be used in order to assess an eventual prepartum depression, this measure aims at eliminating bias if detecting a postpartum depression by the Edinburgh Depression questionnaire

Assessment of postpartum depression with the Edinburgh Postnatal Depression Scale. It is a 10 item questionnaire.

In the area of the cesarean delivery scar, the area of dynamic secondary hyperalgesia for punctate mechanical stimuli around the surgical incision will be measured around her scar according to the method described by Stubhaug et al. In brief, stimulation with a Von Frey Filament (225.1gr) is started from outside the hyperalgesic area where no pain sensation is experienced toward the incision until the patient reports a distinct change in perception. The first point where a painful, sore, or sharp feeling appears is recorded, and the distance to the incision is measured. If no change in sensation appears, stimulation is stopped at 0.5 cm from the incision. The area of secondary hyperalgesia is determined by testing along radial lines separated by 5 cm around the incision. The observations are translated onto graph paper, and the surface is calculated as cm2/cm of incision.

In the area of the cesarean delivery scar, the area of dynamic secondary hyperalgesia for punctate mechanical stimuli around the surgical incision will be measured around her scar according to the method described by Stubhaug et al. In brief, stimulation with a Von Frey Filament (225.1gr) is started from outside the hyperalgesic area where no pain sensation is experienced toward the incision until the patient reports a distinct change in perception. The first point where a painful, sore, or sharp feeling appears is recorded, and the distance to the incision is measured. If no change in sensation appears, stimulation is stopped at 0.5 cm from the incision. The area of secondary hyperalgesia is determined by testing along radial lines separated by 5 cm around the incision. The observations are translated onto graph paper, and the surface is calculated as cm2/cm of incision.

In the area of the cesarean delivery scar, the area of dynamic secondary hyperalgesia for punctate mechanical stimuli around the surgical incision will be measured around her scar according to the method described by Stubhaug et al. In brief, stimulation with a Von Frey Filament (225.1gr) is started from outside the hyperalgesic area where no pain sensation is experienced toward the incision until the patient reports a distinct change in perception. The first point where a painful, sore, or sharp feeling appears is recorded, and the distance to the incision is measured. If no change in sensation appears, stimulation is stopped at 0.5 cm from the incision. The area of secondary hyperalgesia is determined by testing along radial lines separated by 5 cm around the incision. The observations are translated onto graph paper, and the surface is calculated as cm2/cm of incision.